PCI-DB.com
  1. Driver
  2. Drone Helicopter Multicopter Controller
  3. Futaba FX22 Transmitter Firmware 6.0

Futaba FX22 Transmitter Firmware 6.0 Download

Posted at November 23, 2024 by PCI-DB Team

Install Driver Automatically
Device NameFutaba FX22 Transmitter Firmware 6.0
CategoryDrone Helicopter Multicopter Controller
ManufacturerFutaba
File Size665 MB
Supported OSWindows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Futaba FX22 Transmitter Firmware 6.0 Description

Updating procedure:

- You will first want to format your SD card. If you are using an existing SD card, any data previously saved to it will be deleted during the "format". We suggest you either save this data on your computer or purchase a new card.
- After inserting the new SD card into the transmitter, turn on the power switch. You will see the word "FORMAT" if you have not previously used this card in the transmitter.
- Turn off the power switch and remove the SD card from its slot.
- Update software
Please insert the SD card which includes the update file.
Push the HOME/EXIT button.
While still holding the HOME/EXIT button, power on the transmitter.
Push the U.MENU/MON. button for three seconds. The software update will begin.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Futaba Drivers

Futaba T14SG Transmitter Firmware 2.0

Device Type: Drone Helicopter Multicopter Controller File Size: 1.5 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Futaba T14SG Transmitter Firmware 6.0

Device Type: Drone Helicopter Multicopter Controller File Size: 665 KB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Futaba FX22 Transmitter Firmware 6.0

Device Type: Drone Helicopter Multicopter Controller File Size: 665 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Futaba 10J Transmitter Firmware 1.0.7

Device Type: Drone Helicopter Multicopter Controller File Size: 443 KB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Futaba T18MZ Transmitter Firmware 2.6.3

Device Type: Drone Helicopter Multicopter Controller File Size: 19.7 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.