Futaba 10J Transmitter Firmware 1.0.7 Download

Posted at December 22, 2024 by PCI-DB Team

Futaba 10J Transmitter Firmware 1.0.7 Description

UPDATE PROCEDURE:

1. Install the drivers for the CIU-2 if you have not previously done so.
2. Update Software Download
Download the 10J update software and store it on your computer. Unzip these files to a folder on your PC.
3. Connect PC, CIU-2 and T10J
Connect the CIU-2 to the USB port of your PC
Connect the cable of CIU-2 to the S.I/F terminal on the back side of the 10J transmitter.
4. Starting the Update software.
5. Put your 10J transmitter into the Update mode
Press power switch on your 10J while pressing the END key at the same time. UPDATE READY will be shown on your transmitters screen.
6. Starting the Software Update

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Futaba Drivers