Strymon TimeLine Pedal Firmware 1.23 Download

Posted at December 22, 2024 by PCI-DB Team

Strymon TimeLine Pedal Firmware 1.23 Description

What’s New:

- Preset naming 
Display an (optionally) scrolling 16 character preset name, or the bank number
- Global Tap tempo 
Keep the most recently tapped tempo across all of your presets
- 5 second Spillover 
Once you’ve played for at least 5 seconds on a patch, the current sound will spill over when you change to a new patch
- Tap averaging 
Tap tempo now averages your taps to more easily zero in on the desired tempo. Some have better rhythm than others
- Kill dry 
Mutes your dry signal for use in a parallel effects loop
- Looper Undo to initial loop & Redo 
Undo all overdubs and revert to the first recorded loop. Redo will bring back the recorded overdubs.
- New dedicated MIDI CC for Bypass 
Bypass or Engage TimeLine via MIDI regardless of which preset you are currently on
- Also … new MIDI CCs for Looper Level, Looper Undo, Looper Redo, and Infinite Repeats
- Loop transitions are now smoother
- Ability to record 100% wet with the looper
- Save to MIDI patch number – when a MIDI program change message is received during a save, the patch will automatically be saved to that location.
- Some miscellaneous “under the hood” bugs were also addressed with this update.

How to Update Your Pedal

Once your MIDI interface has been configured, you are now ready to update your Strymon pedal. Before proceeding with the following steps, make sure that your Strymon pedal is connected to your computer with a dedicated MIDI interface and that your Librarian software is open.

- Navigate to View > Software Update at the top of your window or screen.
- Click on “Install the Update”.
- After the update has successfully been installed, click “OK”.
- You can check in the bottom right corner of the Librarian to confirm the update was installed successfully.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Strymon Drivers