Rosewill RNX-N4 Router Firmware 1.2.04 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Rosewill RNX-N4 Router Firmware 1.2.04
Category	Firmware
Manufacturer	Rosewill
File Size	1.2 MB
Supported OS	OS Independent

Rosewill RNX-N4 Router Firmware 1.2.04 Description

Specifications:
- Chipset: Ubicom IP5K+ Ralink2820 + Ralink 2860
- Standards: IEEE 802.11b/g, IEEE 802.11n Draft
- Device Management Configuration: Web-based configuration (HTTP)
- Firmware Upgrade: Upgrade firmware via web-browser
- Administrator Setting: Administrator password change; Idle time out
- Reset Setting: Reboot; Reset to Factory Default
- System monitoring: Status and Statistics, Time Zone & NTP Client, Event Log, Email Alarm
- Security: 64/128 bit WEP Encryption, WPA Personal (WPA-PSK using TKIP or AES), WPA Enterprise (WPA-EAP using TKIP), 802.1x Authenticator, WPA/WPA2WPA2
- Ports: 1 x 10/100/1000M WAN; 4 x 10/100/1000M LAN
- LEDs: Power/ Status,WAN (Internet connection), LAN1~LAN4 (10/100/1000Mbps), WLAN (Wireless Connection)
- Buttons: (1 second for Reboot, 5 second for Reset to Factory Default )
- Data Rates: Up to 300Mbps
- Frequency Band: 2.400~2.484 GHz
- Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), Modulation Technique OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
- Operating Channels: 11 for North America, 14 for Japan, 13 for Europe
- Receive Sensitivity: (Typical)IEEE802.11n : -65dBm~-90dBm, IEEE802.11g : 6Mbps~ -90dBm, 54Mbps~ -74dBm, IEEE802.11b: 1Mbps~ -91dBm, 11Mbps~ -90dBm
- Available transmit power IEEE802.11n: 14~18dBm, IEEE802.11g :18dBm~6Mbps, 14dBm~54Mbps, IEEE802.11b:18dBm~1, 11Mbps
- Interface: Ethernet Port
- Topology: Infrastructure
- VPN support: IPSec, L2TP, and PPTP VPN pass-through
- Power Input: Power Supply: 90 to 240 VDC ± 10% (depends on different countries)
- Device: 12 V/ 1.25A

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Rosewill Drivers