Rosewill RNX-G100 Wireless Adapter Firmware 1.2 Download

Posted at May 3, 2024 by PCI-DB Team

Rosewill RNX-G100 Wireless Adapter Firmware 1.2 Description

Specifications:

- Chip:88W8335+88W8010 Marvell
- Host Interface:USB 2.0
- Standard:IEEE 802.11b / IEEE 802.11g
- Antenna Type:Microstrip Antenna (0dBi)
- Wireless Frequency Range:2.412GHz ~ 2.4835GHz
- Wireless Signal Rates (with automatic fallback):802.11b (11Mbps, 9Mbps, 6Mbps, 5Mbps, 2Mbps, 1Mbps) / 802.11g (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps)
- Wireless Transmit Output Power: 54Mps OFDM:15dBm+/- 2dBm / 11Mps CCK:16dBm~18dBm
- Security:Hardware-Based Encryption/Decryption Using 64-bit, 128-bit Wired-Equivalent Privacy (WEP) keys, WPA and WPA2 are also supported.
- Range Indoors: up to 100 meters 
- Range Outdoors: up to 300 meters 
- Operating Temperature: 0 - 50 degrees
- Storage: -20-70
- LED Indicators: Link / Activity
- Power: 5v Bus powered

About Network Adapter Firmware:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter’s drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don’t forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Rosewill Drivers