Rosewill RNX-EasyN400 Router Firmware 1.1.1.77 Download

Posted at December 22, 2024 by PCI-DB Team

Rosewill RNX-EasyN400 Router Firmware 1.1.1.77 Description

Specifications:

Standards 
- IEEE 802.11b/g/n (ver2.0)

Chipset
- Ralink 3052

Device Management
- Web-based configuration (HTTP)

Security
- 64/128 bit WEP Encryption
- WPA Personal (WPA-PSK using TKIP or AES)
- WPA Enterprise (WPA-EAP using TKIP)
- Wi-Fi Protection Setup (WPS)

WAP/WAP2
- WPA/ WPA2

Ports
- 1 x 10/100 WAN; 4 x 10/100 LAN

LEDs
- Power Status
- WAN (Internet connection)
- 10/100Mbps LAN1~LAN4
- WLAN(Wireless connection)

Data Rates
- Up to 150Mbps

Modulation
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- DBPSK, DQPSK, CCK

Frequency Band
- 2.4GHz - 2.484GHz

Antenna
- Fixed 2 dBi Antenna x1

Cannels
- 11 CH (US, Canada), 13 CH (ETSI), 14 CH (Japan)

Transmitted Power
- IEEE802.11N
- MCS 0~15@ >16dBm
- IEEE802.11g
- 6~54 Mbps@ 16dBm
- IEEE802.11b
- 1, 11Mbps@ 19dBm

Receiver Sensitivity
- IEEE802.11n(2RX)
- MCS0/8 @ -91dBm
- MCS7/15@ -74dBm
- IEEE802.11g (2RX)
- 6Mbps@ -92dBm
- 54Mbps@ -75dBm
- IEEE802.11b (1RX)
- 1Mbps@ -93dBm
- 11Mbps@ -91dBm

Interface
- Ethernet Port

VPN support
- IPSec, L2TP, and PPTP VPN pass-through

Temperature
- 0°C - 45°C (32°F - 113°F)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Rosewill Drivers