AiM Tech SmartyCam GP HD Camera Firmware 01.03.52 Download

Posted at December 22, 2024 by PCI-DB Team

AiM Tech SmartyCam GP HD Camera Firmware 01.03.52 Description

Change/additions:

- Added disabling keys and MMC door switch when vehicle is moving (Speed > 20mph-35kmh)
- New slave processor firmware (Ver: 60.03.41):
- Fixed bug in lateral acceleration for the new Inertial Measure Unit when flip over is enabled

How to update SmartyCam HD firmware:

- To update SmartyCam firmware HD through the SD Card:
- Switch SmartyCam HD off and remove the SD Card from it
- Insert the SD Card into the PC
- Unzip the downloaded file and copy the contained run fill (smarty2_update_v01.XX.XX.run) on the SD Card
- Do not copy the run file in a sub-folder
- Move the SD Card from the PC to the SmartyCam HD
- Switch on the SmartyCam HD, by pushing the central and right buttons at the same time
- When the SmartyCam HD is on, release the central button
- When you will see the Linux Penguin on the display, you can also release the right button
- The firmware upgrade is now running
- At the end of this procedure switch on the SmartyCam HD only pushing the central button

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AiM Tech Drivers